Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 97393 | SHUR-LOK COMPANY DBA SPS FASTENER DI |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABKU | FLANGE THICKNESS | 0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| MATT | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL |
| ABQU | DRIVE POINT DEPTH | 0.080 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ADBJ | UNDERCUT THICKNESS | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| ACTD | NUT DIAMETER | 1.875 INCHES MINIMUM AND 1.895 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| CQJX | NOMINAL THREAD SIZE | 1.625 INCHES |
| ADBG | NUT THICKNESS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ACTA | NUT STYLE | ROUND |
| BZRR | THREAD SERIES | UNJEF |
| ADBH | DRIVE POINT WIDTH | 0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |