Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 303 FED STD SINGLE MATERIAL RESPONSE |
| ABHP | OVERALL LENGTH | 0.470 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| AMGR | SECOND END SLOT DEPTH | 0.062 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| AAHP | SECOND END STYLE | SLOTTED |
| AKTN | SECOND END SLOT WIDTH | 0.093 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AMDL | FIRST END DIAMETER | 0.1840 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.5500 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 0.5500 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.375 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.062 INCHES NOMINAL |
| AAHG | FIRST END GROOVE WIDTH | 0.0300 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 5 |