Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 80063 |
US ARMY COMMUNICATIONS & ELECTRONICS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHP |
SECOND END STYLE |
CIRCULAR GROOVED |
| AAHP |
SECOND END STYLE |
CIRCULAR GROOVED |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
PLAIN |
| AMFZ |
SECOND END DIAMETER |
0.3120 INCHES NOMINAL |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES |
| AAHX |
SECOND END GROOVE DIAMETER |
0.2900 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.1860 INCHES NOMINAL |
| AAHW |
SECOND END GROOVE WIDTH |
0.0310 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
2 |
| MATT |
MATERIAL |
STEEL |
| CSPY |
LARGEST STEP DIAMETER |
0.312 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
MIDDLE SECTION FLATTED W/2 THD HOLES THRU,NO.6-40 UNF-2B,0.281 IN.BETWEEN CENTERS |
| ABHP |
OVERALL LENGTH |
1.188 INCHES NOMINAL |
| AMFQ |
SECOND END DISTANCE FROM END TO GROOVE |
0.1252 INCHES NOMINAL |
Similar Parts