Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | STEEL COMP 303 |
| MATT | MATERIAL | STEEL COMP 303 |
| FEAT | SPECIAL FEATURES | BOTH ENDS CHAMPERED 0.010 IN. AT 45.0 DEG; FINISH PER MIL-C-13924 |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| ATPC | STEP QUANTITY | 2 |
| CSPY | LARGEST STEP DIAMETER | 0.155 INCHES NOMINAL |
| AAHG | FIRST END GROOVE WIDTH | 0.0480 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.1550 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.062 INCHES NOMINAL |
| ZZZV | FSC APPLICATION DATA | TELETYPE AND FACSIMILE EQUIPMENT |
| AAHH | FIRST END GROOVE DIAMETER | 0.1160 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.250 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |