Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMCX | FIRST END FLAT LENGTH | 0.250 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMFZ | SECOND END DIAMETER | 0.3120 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.000 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.1869 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.125 INCHES NOMINAL |
| MATT | MATERIAL | COPPER ALLOY |
| AAGZ | FIRST END STYLE | FLATTED |
| AMHD | SECOND END HOLE DEPTH | 0.112 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.312 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | PRESSED SLEEVE WELDED TO FIRST END,0.2515 IN.MIN AND 0.2535 IN.MAX DIA,1.125 IN.LG,0.250 IN.FROM END |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE |
| ATPC | STEP QUANTITY | 3 |
| AAHP | SECOND END STYLE | THREADED CROSS DRILLED |
| AMCW | FIRST END FLAT DEPTH | 0.0310 INCHES NOMINAL |