Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED |
| AAGZ | FIRST END STYLE | PLAIN |
| ATPC | STEP QUANTITY | 7 |
| AAHX | SECOND END GROOVE DIAMETER | 0.1200 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.1640 INCHES NOMINAL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 1.0420 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.1640 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| AMDL | FIRST END DIAMETER | 0.1970 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AAHW | SECOND END GROOVE WIDTH | 0.0350 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.035 INCHES NOMINAL |