Part Number
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code | Company |
|---|---|
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
Federal Supply Class
Title
LUGS, TERMINALS, AND TERMINAL ST
Inclusions:
INCLUDES BINDING POSTS; BATTERY CLIPS; STUD TERMINALS; TEST CLIPS.
Exclusions:
EXCLUDES CAPS, ELECTRICAL; CLIPS, ELECTRICAL; AND CONTACTS, ELECTRICAL.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABCX | BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| ABCX | BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| MATT | MATERIAL | PLASTIC BOARD |
| ABDW | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.292 INCHES |
| ABGP | BOARD OVERALL WIDTH | 0.585 INCHES |
| CSBQ | COMMON FEEDTHRU RECEPTACLE SET QUANTITY | 30 SINGLE GROUP |
| ABCS | TERMINAL ROW QUANTITY | 3 |
| ABGQ | BOARD OVERALL HEIGHT | 0.600 INCHES |
| CRZR | FEEDTHRU TERMINAL QUANTITY | 60 SINGLE COMBINATION |
| ABGN | BOARD OVERALL LENGTH | 4.390 INCHES |
| MARK | SPECIAL MARKINGS | ROWS MARKED 1,2,3,CAVITY LETTERS A THRU H,J THRU N,P,R THRU W |
| CWLG | TERMINAL PATTERN ARRANGEMENT | RANDOM |
| MATT | MATERIAL | COPPER ALLOY TERMINALS |
| ABDX | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.189 INCHES |
| CQDC | COMMON FEEDTHRU RECEPTACLE QUANTITY PER SET | 2 SINGLE GROUP |
| ABCU | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.182 INCHES |
| AAQW | MOUNTING SLOT LENGTH | 0.202 INCHES |
| AAQX | MOUNTING SLOT WIDTH | 0.182 INCHES |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 SLOT |
| AAQL | BODY STYLE | TAPER PIN |
| ABDU | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 4.012 INCHES |
| CWLN | TERMINAL DESIGN | FEEDTHRU |
| ABCT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.182 INCHES |