Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , SHOULDERED AND RECESSED
Definition:
A WASHER, ROUND IN SHAPE, HAVING A CENTRALLY LOCATED HOLE. ONE BEARING SURFACE IS FLAT, THE OTHER SURFACE IS IN THE FORM OF A RAISED SHOULDER (BOSS) HAVING A FLAT BEARING SURFACE. EITHER OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILAR SHAPED RECESS. THE THICKNESS OF THE SHOULDER (BOSS) MUST NOT EXCEED 25 PERCENT OF THE SHOULDER (BOSS) DIAMETER. FOR ITEMS HAVING A SHOULDER (BOSS) OF GREATER THICKNESS, USE BEARING, SLEEVE; BUSHING, SLEEVE; OR SPACER, SLEEVE. EXCLUDES INSULATOR, WASHER AND THRUST TYPE WASHERS.
CAGE Information
| Code | Company |
|---|---|
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAVH | SHOULDER DIAMETER | 1.172 INCHES MINIMUM AND 1.203 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.578 INCHES MINIMUM AND 0.583 INCHES MAXIMUM |
| CSTM | RECESS ANGLE | 45.0 DEGREES NOMINAL |
| MATT | MATERIAL | COPPER ALLOY 170 OVERALL |
| ABKV | OUTSIDE DIAMETER | 1.266 INCHES MINIMUM AND 1.297 INCHES MAXIMUM |
| ABMG | SHOULDER HEIGHT | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDERED AND RECESSED |
| ABPX | MATERIAL THICKNESS | 0.008 INCHES MINIMUM AND 0.012 INCHES MAXIMUM |