Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 64959 |
AMERICAN TELEPHONE AND TELEGRAPH CO |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| ABGT |
BOARD THICKNESS |
0.062 INCHES |
| ABGP |
BOARD OVERALL WIDTH |
1.250 INCHES |
| CQCW |
FEEDTHRU CONNECTION END TYPE |
434 BOTH ENDS SINGLE COMBINATION |
| MATT |
MATERIAL |
PLASTIC PHENOLIC BOARD AND PAPER BOARD |
| SFTT |
SURFACE TREATMENT |
TIN TERMINALS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
L-P-513,TYPE PBE FED SPEC SINGLE MATERIAL RESPONSE BOARD |
| MARK |
SPECIAL MARKINGS |
C1 C2 C3 R1 R2 R3 CR1 CR2 CR3 |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.188 INCHES |
| CRZR |
FEEDTHRU TERMINAL QUANTITY |
14 SINGLE COMBINATION |
| ABCS |
TERMINAL ROW QUANTITY |
2 |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
MULTI-ROW |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-V173 MIL SPEC SINGLE TREATMENT RESPONSE BOARD |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
1.813 INCHES |
| AAMA |
MOUNTING HOLE DIAMETER |
0.166 INCHES |
| SFTT |
SURFACE TREATMENT |
VARNISH BOARD |
| AAQL |
BODY STYLE |
STRIP TYPE |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.625 INCHES |
| ABCU |
DISTANCE BETWEEN TERMINAL ROW CENTERS |
1.000 INCHES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-T-10727 MIL SPEC SINGLE TREATMENT RESPONSE TERMINALS |
| CWLN |
TERMINAL DESIGN |
VERTICAL FEEDTHRU |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.188 INCHES |
| ABGN |
BOARD OVERALL LENGTH |
2.188 INCHES |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED HOLE |
Similar Parts