Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNEF |
| ADBG | NUT THICKNESS | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ADBH | DRIVE POINT WIDTH | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AZKQ | TEMP RATING | NOT RATED |
| ACTD | NUT DIAMETER | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| ACTA | NUT STYLE | ROUND |
| AAJD | THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ABQU | DRIVE POINT DEPTH | 0.051 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |