Part Number
Definition:
AN ELECTRICAL FITTING WITH ELECTRICAL CONTACTS CONSTRUCTED TO BE AFFIXED TO THE END OF A CABLE, CONDUIT, COAXIAL LINE, CORD, WIRE (INCLUDES PRINTED/ETCHED), PRINTED WIRING BOARD, OR THE LIKE FOR CONVENIENCE IN JOINING WITH ANOTHER ELECTRICAL CONNECTOR(S) OR PRINTED WIRING BOARD. IT IS DESIGNED TO BE MOUNTED ON A BULKHEAD, CHASSIS, PANEL, WALL, PRINTED WIRING BOARD, OR THE LIKE. EXCLUDES LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (AS MODIFIED) AND SOCKET, PLUG-IN ELECTRONIC COMPONENTS. SEE ALSO WIRING HARNESS (AS MODIFIED) AND CABLE ASSEMBLY (AS MODIFIED). FOR ITEMS WITH TERMINATION WIRES OF MORE THAN FOUR INCHES IN LENGTH, SEE LEAD ASSEMBLY, ELECTRICAL. FOR ITEMS WITHOUT INSERTS, SEE SHELL, ELECTRICAL CONNECTOR.
CAGE Information
| Code | Company |
|---|---|
| 77820 | AMPHENOL CORPORATION DBA AMPHENOL AE |
Federal Supply Class
Title
CONNECTORS, ELECTRICAL
Inclusions:
INCLUDES PLUGS; JACKS; RECEPTACLES, ELECTRONIC COMPONENT SOCKETS AND ASSOCIATED ACCESSORIES
Exclusions:
EXCLUDES INTERCONNECTORS, FIBER OPTIC
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.462 INCHES MINIMUM AND 0.472 INCHES MAXIMUM |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.462 INCHES MINIMUM AND 0.472 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 0.825 INCHES MAXIMUM |
| PRMT | PRECIOUS MATERIAL | SILVER |
| ADZC | ENVIRONMENTAL PROTECTION | SALT WATER RESISTANT AND MOISTURE RESISTANT AND VIBRATION RESISTANT |
| AFRN | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| AFQW | MATING END QUANTITY | 1 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.031 INCHES NOMINAL |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| CQZG | INSERT MATERIAL | RUBBER CHLOROPRENE CLASS CR SINGLE MATING END |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES SILVER |
| CXCL | INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS |
| ABKW | OVERALL HEIGHT | 1.328 INCHES MINIMUM AND 1.360 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| CXCG | INCLUDED CONTACT QUANTITY | 14 SINGLE MATING END 2ND CONTACT GROUPING |
| AFRP | INSERT POSITION IN DEG | 155.0 |
| AFRT | SHELL TYPE | SOLID |
| CSCF | TERMINAL TYPE | SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS |
| ABMK | OVERALL WIDTH | 1.328 INCHES MINIMUM AND 1.360 INCHES MAXIMUM |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 SINGLE MATING END 2ND CONTACT GROUPING |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.145 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
| CQYH | CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END ALL CONTACT GROUPINGS |
| CXCG | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END 1ST CONTACT GROUPING |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.015 SILVER GRAINS, TROY |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.031 INCHES NOMINAL |
| AFQZ | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 SINGLE MATING END 1ST CONTACT GROUPING |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | 14-15 SINGLE MATING END |