Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 0HMS1 |
WOODWARD HRT DIV WOODWARD HRT/CADILL |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| BDSR |
SECOND END SPLINE QUANTITY |
12 |
| BDSR |
SECOND END SPLINE QUANTITY |
12 |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AMER |
FIRST END INTERNAL THREAD LENGTH |
0.410 INCHES NOMINAL |
| AMGC |
SECOND END SPLINE MAJOR DIAMETER |
0.3900 INCHES NOMINAL |
| AMGF |
SECOND END PITCH DIAMETER |
0.3700 INCHES NOMINAL |
| AMGB |
SECOND END SPLINE MINOR DIAMETER |
0.3500 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
0.3900 INCHES NOMINAL |
| AMGA |
SECOND END SPLINE LENGTH |
2.230 INCHES NOMINAL |
| CSPY |
LARGEST STEP DIAMETER |
3.310 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AAHP |
SECOND END STYLE |
SPLINED (INVOLUTE) |
| ABHP |
OVERALL LENGTH |
4.270 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.3700 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
4 |
| AAGZ |
FIRST END STYLE |
INTERNAL THREADED |
| AMGE |
SECOND END PRESSURE ANGLE |
30.0 DEGREES NOMINAL |
Similar Parts