Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 80539 | SPS TECHNOLOGIES LLC DBA AEROSPACE F |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAUR | GRIP DIAMETER | 0.4672 INCHES MINIMUM AND 0.4682 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL C FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJD | THREAD CLASS | 3A |
| AATD | EXTENDED WASHER THICKNESS | 0.099 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 4.679 INCHES MINIMUM AND 4.709 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 3.990 INCHES MINIMUM AND 4.010 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.494 INCHES MINIMUM AND 0.503 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 8740 OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AHYM | NOMINAL THREAD DIAMETER | 0.437 INCHES |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| AAUB | HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.435 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASA | THREAD LENGTH | 0.694 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AASK | HEAD STYLE | DOUBLE HEXAGON W/HOLE |