Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , RECESSED
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
CAGE Information
| Code | Company |
|---|---|
| 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSTM | RECESS ANGLE | 100.0 DEGREES NOMINAL |
| CSTM | RECESS ANGLE | 100.0 DEGREES NOMINAL |
| ABMD | RECESS DIAMETER | 0.359 INCHES MINIMUM AND 0.364 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| ABKV | OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.191 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.140 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | RECESS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-354 T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |