Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 25685 | NAVAL SHIP ENGINEERING CENTER PHILAD |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAGZ | FIRST END STYLE | SLOTTED |
| FEAT | SPECIAL FEATURES | TWO HOLES LOCATED 2.440IN.FROM BOTH ENDS,5.000IN.APART,0.275IN.DIA,TO FACILITATE BARREL NUTS |
| MATT | MATERIAL | STEEL COMP 304 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| AMDW | FIRST END SLOT DEPTH | 0.060 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 9.980 INCHES NOMINAL |
| AKTM | FIRST END SLOT WIDTH | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| CSPY | LARGEST STEP DIAMETER | 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 5 |
| AAHN | END SIMILARITY | IDENTICAL |
| AMDL | FIRST END DIAMETER | 0.3900 INCHES MINIMUM AND 0.4100 INCHES MAXIMUM |