Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 58998 | EMHART TEKNOLOGIES LLC DBA FASTENER |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAUR | GRIP DIAMETER | 0.374 INCHES NOMINAL |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| AGAV | END ITEM IDENTIFICATION | FIGHTER AIRCRAFT - FIRST (F18 E/F) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.396 INCHES NOMINAL FIRST HOLE |
| AASU | HEAD HEIGHT | 0.210 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.516 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.111 INCHES MAXIMUM FIRST HOLE |
| AAZH | HEAD MINOR DIAMETER | 0.582 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.500 INCHES MINIMUM AND 1.547 INCHES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| ANEE | GRIP LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |