Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 76301 | BOEING COMPANY THE DBA BOEING |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AASA | THREAD LENGTH | 0.399 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAZH | HEAD MINOR DIAMETER | 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.875 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.259 INCHES MINIMUM AND 1.289 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| AASU | HEAD HEIGHT | 0.205 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| AATC | EXTENDED WASHER DIAMETER | 0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.027 INCHES NOMINAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUR | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |