Part Number
Part Number:
NSN:
NIIN:
Item Name:
MOUNT , RESILIENT , WEAPON SYSTEM
Definition:
AN ITEM MADE OF MATERIAL HAVING ELASTIC PROPERTIES. IT MAY HAVE RIGID MOUNTING FACILITIES SUCH AS A FLANGE(S), SLEEVE(S), STUD(S) OR THE LIKE. IT IS DESIGNED TO ISOLATE OR DAMPEN SHOCK AND/OR VIBRATION OF A CONTINUOUS OR INTERMITTENT ORIGIN AND SERVE AS A SUPPORT FOR A WEAPON SYSTEM COMPONENT TO BE ISOLATED. EXCLUDES MOUNT, RESILIENT, GENERAL PURPOSE; SPRING (AS MODIFIED); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; HYDRAULIC AND PNEUMATIC SHOCK ABSORBERS, DASH-POTS, GROMMETS, AND SHOCK PADS.
CAGE Information
| Code | Company |
|---|---|
| 13636 | BARRY WRIGHT CORPORATION DBA BARRY C |
Federal Supply Class
Title
HARDWARE, WEAPON SYSTEM
Inclusions:
INCLUDES ADAPTERS; ANCHOR PLATES AND STRAPS; ANODES; BELLOWS; COUPLINGS; CONTROL RODS; ACCESS DOORS; FAIRLEADS; MOUNTS; TIE RODS; YOKES.
Exclusions:
EXCLUDES COMMERCIAL HARDWARE (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BXCH | SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | ROUND SPRING COMPRESSION FOUR-HOLE FLANGE |
| ABUJ | THREAD SIZE | 0.250-28 ALL THREADED PORTIONS |
| BXDM | RESILIENT MEMBER MATERIAL | RUBBER, SILICONE BASE |
| MATT | MATERIAL | STEEL CORROSION RESISTING BASE |
| AFQN | FLANGE LENGTH | 1.781 INCHES MINIMUM AND 1.843 INCHES MAXIMUM |
| BXCW | LOAD/FREQUENCY RANGE | 40.0 LB. LOAD FOR 7 TO 9 HERTZ |
| BXCQ | FLANGE MOUNTING HOLE DIAMETER | 0.196 INCHES MINIMUM AND 0.206 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AGXF | STUD LENGTH | 0.692 INCHES MINIMUM ALL THREADED STUD AND 0.756 INCHES MAXIMUM ALL THREADED STUD |
| HGTH | HEIGHT | 1.124 INCHES MINIMUM AND 1.188 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 1.781 INCHES MINIMUM AND 1.843 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING CUP |
| AYXK | MAXIMUM LOAD RATING | 150.0 POUNDS |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM |