Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 50599 | PARKER-HANNIFIN CORPORATION DBA STRA |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| ABKV | OUTSIDE DIAMETER | 0.656 INCHES NOMINAL |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| CQBD | BURST TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-27267 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| CRXX | MEASURING METHOD AND LENGTH | 34.250 INCHES NOMINAL WORKING |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UNJF 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRSM | VACUUM IN TORR | 50.8 |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| AAJD | THREAD CLASS | 3B 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 73342, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| ADLH | SECOND END FITTING SPEC/STD DATA | MIL-F-27272 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAJP | OUTSIDE SURFACE TREATMENT | PASSIVATED |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| ADLG | FIRST END FITTING SPEC/STD DATA | MIL-F-27272 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| AAJD | THREAD CLASS | 3B 2ND END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |