Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 06710 | VALLEY-TODECO INC. |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AATD | EXTENDED WASHER THICKNESS | 0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT EAGLE F-15 |
| AASA | THREAD LENGTH | 0.742 INCHES MINIMUM AND 0.792 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 2.752 INCHES MINIMUM AND 2.782 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.055 INCHES NOMINAL |
| AATC | EXTENDED WASHER DIAMETER | 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 4 |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE |
| BQDM | HOLE TYPE | DRILLED |
| AASU | HEAD HEIGHT | 0.494 INCHES MINIMUM AND 0.514 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AATB | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| AASK | HEAD STYLE | DOUBLE HEXAGON W/HOLE |