Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 60047 | PALL AEROPOWER CORP SUB OF PALL CORP |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADNQ | DIFFERENTIAL PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| ADNP | DROP PRESSURE | 12.0 POUNDS PER SQUARE INCH |
| CRXW | FILTERING MEDIA DESIGN | ANY ACCEPTABLE SINGLE FILTERING MEDIA RESPONSE |
| MATT | MATERIAL | ANY ACCEPTABLE FILTERING MEDIUM |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| ADAS | BODY INSIDE DIAMETER | 1.372 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 2350-01-305-0028 |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| APGF | DESIGN TYPE | LIMITED |
| AZKQ | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
| ADNH | FILTRATION RATING IN MICRONS | 5.0 NOMINAL |
| ADNK | FLOW DIRECTION | INSIDE OUT |
| AZTL | BODY OVERALL LENGTH | 7.295 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.845 INCHES NOMINAL |