Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 06710 | VALLEY-TODECO INC. |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASA | THREAD LENGTH | 0.572 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-CLOSE TOLERANCE,SPLINE DRIVE,CRES (125 KSI FSU) DRILLED, SHORT THREAD |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | 3.187 INCHES MINIMUM AND 3.207 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.982 INCHES MINIMUM FASTENER AND 0.984 INCHES MAXIMUM FASTENER |
| AAUR | GRIP DIAMETER | 1.031 INCHES MINIMUM AND 1.063 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ANEE | GRIP LENGTH | 2.625 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| AAZH | HEAD MINOR DIAMETER | 1.097 INCHES MINIMUM AND 1.107 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM FASTENER AND 0.146 INCHES MAXIMUM FASTENER |
| AASU | HEAD HEIGHT | 0.400 INCHES NOMINAL |