Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 06710 | VALLEY-TODECO INC. |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAZH | HEAD MINOR DIAMETER | 0.448 INCHES MINIMUM AND 0.455 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CRHC | HOLE CONFIGURATION STYLE | SPLINE |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| ANEE | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ASXK | HOLE QUANTITY | 1 |
| AASA | THREAD LENGTH | 0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| AAUB | HOLE DIAMETER | 0.041 INCHES MINIMUM AND 0.051 INCHES MAXIMUM |
| BQDM | HOLE TYPE | DRILLED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASU | HEAD HEIGHT | 0.164 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.256 INCHES MINIMUM AND 1.303 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |