Part Number
Part Number:
NSN:
NIIN:
Item Name:
SYNCHRO , CONTROL TRANSFORMER
Definition:
A SYNCHRO CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED. THE ELECTRICAL OUTPUT OF THE ROTOR IS DEPENDENT UPON BOTH THE POSITION OF THE ROTOR AND THE ELECTRICAL INPUT TO THE STATOR FROM A TRANSMITTER SYNCHRO OR A DIFFERENTIAL SYNCHRO. DOES NOT INCLUDE VARIABLE RESISTORS, GONIOMETERS, OR VARIABLE TRANSFORMERS.
CAGE Information
| Code | Company |
|---|---|
| 10112 | AXSYS TECHNOLOGIES, INC. |
Federal Supply Class
Title
SYNCHROS AND RESOLVERS
Inclusions:
Exclusions:
EXCLUDES SYNCHRO SYSTEMS; SERVO MECHANISMS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABPA | UNDERCUT DIAMETER | 1.9995 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.9995 INCHES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 450.0 MILLIWATTS NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| AJVF | PHASE SHIFT ANGLE IN DEG | 1.000 INPUT TO OUTPUT NOMINAL |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 408.00 NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| ABHP | OVERALL LENGTH | 3.9320 INCHES MAXIMUM |
| AJSL | BODY SIZE | 23 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 40.00 INPUT |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.185 INCHES SINGLE SHAFT |
| ABKU | FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 2.2500 INCHES NOMINAL |
| CQWQ | SHAFT THREAD LENGTH | 0.3860 INCHES NOMINAL SINGLE SHAFT |
| ABWV | SHAFT DIAMETER | 0.2405 INCHES NOMINAL SINGLE SHAFT |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AJWQ | PILOT LENGTH | 0.2000 INCHES NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 212.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 262.00 NOMINAL |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| ABPC | UNDERCUT WIDTH | 0.2030 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.2250 INCHES NOMINAL |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AJSP | STATOR INPUT CURRENT RATING | 20.0 MILLIAMPERES NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAVH | SHOULDER DIAMETER | 1.9900 INCHES NOMINAL |
| AKAN | SHAFT THREAD CLASS | 2A |
| AJVM | SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 750.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 96.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 1660.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 20.00 NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0/+6.0 |
| ABXF | SHAFT LENGTH | 0.7320 INCHES NOMINAL SINGLE SHAFT |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 80.00 NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.1600 INCHES MAXIMUM |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AAVL | PILOT DIAMETER | 0.6000 INCHES NOMINAL |