Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code | Company |
|---|---|
| 92215 | ALCOA GLOBAL FASTENERS INC. DBA ALCO |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| AASB | FASTENER LENGTH | 5.200 INCHES MINIMUM AND 5.247 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.440 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.437 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAUR | GRIP DIAMETER | 0.4358 INCHES MINIMUM AND 0.4367 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASL | HEAD DIAMETER | 0.890 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| ANEE | GRIP LENGTH | 4.740 INCHES MINIMUM AND 4.760 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |