Part Number
Part Number:
NSN:
NIIN:
Item Name:
BOLT , CLOSE TOLERANCE
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code |
Company |
| 92215 |
ALCOA GLOBAL FASTENERS INC. DBA ALCO |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AGAV |
END ITEM IDENTIFICATION |
PACER DAWN |
| AAUR |
GRIP DIAMETER |
0.748 INCHES MINIMUM AND 0.749 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
SPLINE DRIVE SHEAR HEAD |
| AAJD |
THREAD CLASS |
3A |
| AAZH |
HEAD MINOR DIAMETER |
1.270 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASB |
FASTENER LENGTH |
5.337 INCHES MINIMUM AND 5.367 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS-6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| AASU |
HEAD HEIGHT |
0.384 INCHES NOMINAL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.7500 INCHES |
| CQBC |
MINIMUM TENSILE STRENGTH |
132000 POUNDS PER SQUARE INCH |
| AASA |
THREAD LENGTH |
0.640 INCHES MINIMUM AND 0.852 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP H11 OVERALL |
Similar Parts