Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code | Company |
|---|---|
| 92215 | ALCOA GLOBAL FASTENERS INC. DBA ALCO |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| AASB | FASTENER LENGTH | 1.080 INCHES MINIMUM AND 1.110 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| AASA | THREAD LENGTH | 0.570 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AASL | HEAD DIAMETER | 0.515 INCHES MINIMUM AND 0.566 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ANEE | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |