Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code | Company |
|---|---|
| 60516 | WEST COAST AEROSPACE INC |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AAUY | POINT LENGTH | 0.039 INCHES NOMINAL |
| AASL | HEAD DIAMETER | 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 NOMINAL MILS FIRST HOLE AND 0.075 NOMINAL CENTIMETERS FIRST HOLE |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASK | HEAD STYLE | FILLISTER COUNTERSUNK |
| AAJD | THREAD CLASS | 3A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2700 METHOD 1 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| ABQJ | POINT STYLE | FLAT |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.598 NOMINAL MILS FIRST HOLE AND 0.608 NOMINAL CENTIMETERS FIRST HOLE |
| ANEE | GRIP LENGTH | 0.303 NOMINAL MILS AND 0.323 NOMINAL CENTIMETERS |
| AAUR | GRIP DIAMETER | 0.189 NOMINAL MILS AND 0.190 NOMINAL CENTIMETERS |
| AASA | THREAD LENGTH | 0.406 INCHES NOMINAL |
| CWDK | POINT CHAMFER ANGLE | 45.0 MAXIMUM OF STANDARD RANGE SINGLE TREATMENT RESPONSE |
| AASB | FASTENER LENGTH | 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| FEAT | SPECIAL FEATURES | HEAD HAS A 0.80 DEG RADIUS DOME |
| AASU | HEAD HEIGHT | 0.012 INCHES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW-CLOSE TOLERANCE, 100 DEG COUNTERSUNK, REDUCED HEAD, HI-TORQUE, NON-MAGNETIC CRES (125 KSI FSU) |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |