Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
| Code |
Company |
| 13829 |
PARKER-HANNIFIN CORPORATION DBA MOBI |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ADAV |
OVERALL DIAMETER |
1.524 INCHES NOMINAL |
| ADAV |
OVERALL DIAMETER |
1.524 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE 52100 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ABNM |
THICKNESS |
0.127 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| CQFM |
HARDNESS RATING |
40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES TOP |
| AAUB |
HOLE DIAMETER |
0.996 INCHES MINIMUM AND 0.998 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL OVERALL |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES BOTTOM |
Similar Parts